MT20W Setup:

The MT20W device connects to StratIS via WiFi. The USB connector on it is for power only, so you can hook it up to any standard USB power source.

Configuring an MT20W for a property requires similar steps to configuring a BE467 bluetooth lock, except the device's serial number must be registered with StratIS first.

  • Email StratIS a picture of the label on the back of the MT20W with the serial number so we can configure it in our system
  • After StratIS has added the device, you will need to follow the attached instructions to setup the MT20W with the Allegion Engage app.

Since this device works via WiFi, you can make credentials using a desktop or laptop browser (Chrome is the supported browser), in addition to the tablet.  

Go to and login and create fobs as you normally would.