Hardware needed:

MT20W card reader, Stratis account, Smart cards


To program a staff key please follow these steps:

  • Navigate to the home menu
    • If you are not logged in log into your site
    • If you are asked select the correct property
    • Tap the picture of the home at the top left
  • Connect the MT20W reader 
    • Ensure that your MT20W reader has a solid blue light
  • Navigate to the staff key menu
    • Tap to select "People"
    • Tap to select "Staff Keys"
  • Create the Key
    • Tap the "New Key" button on the top-right
    • Select the staff member the key is for and then select "Next"
    • Select all of the unit groups that the key should access (limit of 11 unit groups per key) and then select "Next"
    • Enter the credential name
    • Select an activation and expiration date if applicable
    • Choose a schedule and then select "Next"
    • Place the card on the MT20W reader
    • Wait until you see the reader flash green and/or hear 3 quick beeps. 
    • You should then see "Credential write complete". Click "Done" to finish.